Error
  • Request Forbidden
 Broadband-Hamnet™ Forum :: General
Board Index Latest Posts Welcome Guest   [Register]  [Login]
 Subject :Service for new camera not appearing.. 2016-01-28- 07:03:44 
N6SXR
Member
Joined: 2012-07-30- 08:05:31
Posts: 35
Location: Stormy Acres

I bought a new IP camera.  I setup a service on the node it was attached and it is not showing up as a clickable link.  Here are my settings.  Pretty simple and have done it before.

Name = Driveway

Link = checked

http://ipcam1:80 for the URL.

ipcam1 has a reserved address.  All I see it a bullet with ipcam1 next to it.  No service link. I can access the camera through the node using the ip address and port.

I'm missing something.


Kirk N6SXR
IP Logged
 Subject :Re:Service for new camera not appearing.. 2016-01-28- 08:01:37 
KF5JIM
Future Astronaut
Joined: 2013-07-17- 12:13:36
Posts: 250
Location: Nederland
How many mesh nodes you you have showing on your network? Usually, if you have a one-node only mesh network, the service will not be advertised.
IP Logged
My opinions and views expressed here are solely my own.
 Subject :Re:Service for new camera not appearing.. 2016-01-28- 08:07:25 
N6SXR
Member
Joined: 2012-07-30- 08:05:31
Posts: 35
Location: Stormy Acres
OK. Had not seen that correlation before. Yes, only have 1 node for testing of the camera. I'll hook up some others and see what happens. Thanks! Kirk N6SXR
IP Logged
Page # 


Powered by ccBoard


SPONSORED AD: