Broadband-Hamnet™ Forum :: Firmware
Welcome Guest   [Register]  [Login]
 Subject :How can I "reflash" a 3.1.0 image in a 54G?.. 2016-10-19- 16:25:34 
VA7IQ
Member
Joined: 2015-11-06- 11:49:25
Posts: 10
Location

I am trying to get a mesh node and standard AP combo to work. I have done this before, but for some reason the mesh node seems to lack a WAN address, when the one that works has no trace of it. Something is different. The one that works is a GL, and the one that does is a Gv4.

So, I thought after doing a 30-30-30 reset and the problem persisted that I should retry flashing it.

Oddly enough, the .bin file cannot be used to flash the mesh node. So, how do I do a reflash when I sue Win10 (Linux not an option)? Do I upload the 3.1 tgx file, then select that to flash it again? or is the image shown in the system as 3.1 tgx a file-system image that can be uploaded internally for a reflash?

Very confusing, and I have no idea how to get this WAN issue to disappear. It does appear to impair connectivity through a gateway node.

FYI I have 1 GW node, 1 working comb of 2 Linksys running mesh + standard AP, and then 1 non-reliable combo of Linksys running mesh (both 54G's) the mesh node having that odd WAN behavior that propagates as a failure to find a gateway in the AP.

Ideas anyone?

Thanks, Don VA7IQ/AE7UP

IP Logged
 Subject :Re:How can I.. 2019-07-31- 05:50:49 
m6jgj
Member
Joined: 2015-02-11- 13:25:28
Posts: 5
Location
  
try reflashing with bbhn-3.1.0-brcm-2.4-squashfs.trx see if that works
IP Logged
Page # 


Powered by ccBoard


SPONSORED AD: